Improved thromboresistance and analytical performance of intravascular amperometric glucose sensors using optimized nitric oxide release coatings

In this work, nitric oxide (NO) release coatings designed for intravenous amperometric glucose sensors are optimized through the use of a polylactic acid (PLA) layer doped with a lipophilic diazeniumdiolated species that releases NO through a proton-driven mechanism. An Elast-Eon E2As polyurethane coating is used to both moderate NO release from the sensor surface and increase the sensor''s linear detection range toward glucose. These sensors were evaluated for thromboresistance and in vivo glucose performance through implantation in rabbit veins. By maintaining NO flux on a similar scale to endogenous endothelial cells, implanted glucose sensors exhibited reduced surface clot formation which enables more accurate quantitative glucose measurements continuously. An in vivo time trace of implanted venous sensors demonstrated glucose values that correlated well with the discrete measurements of blood samples on a benchtop point-of-care sensor-based instrument. The raw measured currents from the implanted glucose sensors over 7 h time periods were converted to glucose concentration through use of both a one-point in vivo calibration and a calibration curve obtained in vitro within a bovine serum solution. Control sensors, assembled without NO release functionality, exhibit distinctive surface clotting over the 7 h in vivo implantation period.     

A Comparison of Three Different Biodegradable Aliphatic Oligoesters (PGA,PLLA, and PCL) with Similar Linear Alkyl End Groups by DSC and SAXS

The biodegradable aliphatic oligoesters polyglycolide (PGA), poly(L-lactide) (PLLA), and poly(?-caprolactone) (PCL) with similar number-average molecular weight M_n values but different linear alkyl end groups [CH₃?[CH₂?CH₂]_m?CH₂?] were compared in terms of their physical properties, parameters such as melting temperature (T_m), crystallinity (x_i), long period (L), and lamella thickness (D). They were analyzed by DSC and SAXS. The effect of a longer and nonpolar alkyl end group such as docosyl [CH₃?[CH₂?CH₂]₁₀?CH₂?] on the long period (L) was more evident for PCL because it was the most nonpolar species in the family of oligoesters analyzed.     

Solid‐Contact Potentiometric Sensor Based on Polyaniline and Unsubstituted Pillar[5]Arene

A novel potentiometric sensor based on screen‐printed carbon electrode covered with electropolymerized polyaniline (PANI) and unsubstituted pillar[5]arene as ionophore has been developed and tested in potentiometric measurements of pH and metal ions. The introduction of pillar[5]arene improved the reversibility of the pH response in the range from 2.0 to 9.0 with the slope of 45 mV/pH. Among metal cations, the response to Fe³⁺ and Ag⁺ ions was referred to PANI redox conversion whereas the signal toward Cu²⁺ in the range from 1.0×10^?6 to 1.0×10^?2 M (limit of detection (LOD) 3.0×10^?7 M) to specific interaction with the macrocycle.     

High Performance Liquid Chromatography/Electrochemistry/High Resolution Electrospray Ionization‐Mass Spectrometry (HPLC/EC/HR ESI‐MS) Characterization of Selected Cytokinins Oxidation Products

Electrochemistry combined with mass spectrometry represents an emerging analytical technique used to study the oxidation pathway of various drugs and in vivo occurring compounds, continuously showing a capability to generate many known metabolites or new oxidation products. An on‐line HPLC/EC/HR ESI‐MS method had been used to investigate the oxidation of selected cytokinin compounds. This setup allowed rapid identification and general structure elucidation of the obtained products. An electrochemical oxidation of isopentenyladenine resulted in five products, including hydroxylated and dehydrogenated products, which correlates very well with its in vivo metabolism. Electrochemical conversion of trans‐zeatin revealed six products, with two dehydrogenation products corresponding to its in vivo occurring metabolites. cis‐Zeatin oxidation in the electrochemical cell gave rise to eight products, resembling similarity to trans‐zeatin oxidation. All three compounds underwent a complete turnover mainly through two oxidation reactions occurring in the electrochemical cell? dehydrogenation and a less typical aliphatic hydroxylation. The resulting products are in correlation with their known in vivo metabolism.     

Electrochemical Immunosensor for the Determination of Total Ghrelin Hormone in Saliva

An electrochemical immunosensor for ghrelin (GHRL) determination in saliva is reported. Anti‐GHRL was immobilized onto Protein G‐magnetic beads and a competitive immunoassay involving biotinylated GHRL and alkaline phosphatase‐streptavidin was implemented. Once conjugate was magnetically captured on a screen‐printed carbon electrode, GHRL quantization was accomplished by DPV of 1‐naphtol formed upon addition of 1‐naphtyl phosphate. A linear range between 10^?3 and 10³ ng/mL GHRL, and a LOD of 7 pg/mL, much smaller than those from commercial ELISA kits, were found. The usefulness of the immunosensor was demonstrated by analyzing human saliva spiked with GHRL at 0.01, 0.1, 1 and 10 ng/mL.     

“Green Electrodes” Modified with Au Nanoparticles Synthesized in Glycerol,as Electrochemical Nitrite Sensor

A new environmentally friendly Au nanoparticles (Au NPs) synthesis in glycerol by using ultraviolet irradiation and without extra‐added stabilizers is described. The synthesis proposed in this work may impact on the non‐polluting production of noble nanoparticles with simple chemicals normally found in standard laboratories. These Au NPs were used to modify a carbon paste electrode (CPE) without having to separate them from the reaction medium. This green electrode was used as an electrochemical sensor for the nitrite detection in water. At the optimum conditions the green sensor presented a linear response in the 2.0×10^?7–1.5×10^?5 M concentration range, a good detection sensitivity (0.268 A L mol^?1), and a low detection limit of 2.0×10^?7 M of nitrite. The proposed modified green CPE was used to determine nitrite in tap water samples.     

High Sensitive Microsensor Based on Organic‐Inorganic Composite for Two‐Dimensional Mapping of H2O2 by SECM

The present work describes the development of a selective, sensitive and stable sensing microsensor for scanning electrochemical microscopy (SECM) to measure H₂O₂ during electrochemical reduction of oxygen. The microsensor is based on graphene and Poly(3,4‐ethylenedioxythiophene) composite as support to iron (III) hexacyanoferrate (II) (PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor). The electrochemical properties of the PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor were investigated by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor showed an excellent electrocatalytic activity toward hydrogen peroxide (H₂O₂) reduction with a diminution of the overpotential of about 500 mV in comparison to the process at a bare gold microelectrode. The microsensor presented excellent performance for two dimensional mapping of H₂O₂ by SECM in 0.1 mol L^?1 phosphate buffer solution (pH 7.0). Under optimized conditions, a linear response range from 1 up to 1000 µmol L^?1 was obtained with a sensitivity of 0.08 nA L µmol^?1 and limit of detection of 0.5 µmol L^?1.     

Amperometric Folic Acid Quantification Using a Supramolecular Tetraruthenated Nickel Porphyrin µ‐Peroxo‐Bridged Matrix Modified Electrode Associated to Batch Injection Analysis

A supramolecular Nickel (II) porphyrin complex containing four pyridyl‐bis(2,2′‐bipyridyl)chloro ruthenium meso substituents was submitted to successive voltammetric cycles in high alkaline media to produce a supramolecular matrix with Nickel centers linked by µ‐peroxo bridges, producing a highly stable thin film able to act as redox mediator for electrocatalytic oxidation of folic acid. The characterization of electrode surface material was performed by Scanning Electron Microscopy and Electrochemical Impedance Spectroscopy. The modified electrode was inserted into a batch injection electrochemical cell used for the rapid and precise quantification of folic acid in pharmaceutical products. The favorable hydrodynamic conditions provided by amperometry‐BIA association allowed a very high throughput with good linear range (1 to 200 µmol L^?1) and low detection limit (7.37×10^?7 mol L^?1). The electrochemical method was applied to the quantification of folic acid in different tablet samples. The results were comparable with values indicated by the manufacturer and those found using high HPLC according to the Brazilian Pharmacopoeia; commercial samples were submitted to a procedure in order to remove lactose of tablets, since carbohydrates act as interfering species. This procedure together with the electrochemical method showed to be simple, rapid, efficient and an appropriate alternative for quantifying this compound in real samples.     

Study of a Novel Bisnaphthalimidopropyl Polyamine as Electroactive Material for Perchlorate‐selective Potentiometric Sensors

In this work, the new polyamine bisnaphthalimidopropyl‐4,4’‐diaminodiphenylmethane is proposed as a new ionophore for perchlorate potentiometric sensors. The optimal formulation for the membrane comprised of 12 mmol kg^?1 of the ionophore, and 68 % (w/w) of 2‐nitrophenyl phenyl ether as plasticizer and 31 % (w/w) of high molecular weight PVC. The sensors were soaked in water for a week to allow leakage of anionic impurities and for one day in a perchlorate solution (10^?4 mol L^?1) to improve reproducibility due to its first usage. The stability constant for the ionophore‐perchlorate association in the membrane, log β_IL1=3.18±0.04, ensured a performance characterized by the slope of 54.1 (±0.7) mV dec^?1 to perchlorate solutions with concentrations between 1.24×10^?7 and 1.00×10^?3 mol L^?1. The sensors are insensitive to pH between 3.5 to 11.0, they have a practical detection limit of 7.66 (±0.42) ×10^?8 mol L^?1 and a response time below 60 s for solutions with perchlorate concentrations above 5×10^?6 mol L^?1. The accuracy of the results was confirmed by the analysis of the contaminant in a certified reference water sample.